HCP Pumps Product Catalog
 

View our entire product line, including accessories, using the link below. 

Download Catalog Now

 

 

Commercial Applications
 
A Series

Submersible Dewatering Pumps

  • All rotors are heat-treated for high-temperature ratings.
  • Stator winding is impregnated with varnish and head-dried in an industrial oven.
  • Assembled professionally and tested for the highest quality.
  • Standard accessories include cable with an epoxy resin-sealed water-resistant cable base, auto-cut thermal motor protector, dual mechanical seals, and lip seal design.
  • The A-05A is an extremely practical and low-temperature pump with an oil-filled motor and single seal design.

General Information

  • Discharge Sizes  2–3″
  • Hp Ranges  0.5–3
  • Applications Sump, Basins & Tanks
  • Motor 2 Pole
  • Solids Handling Size  1/4–1/2″
  • Max Head 119 ft
  • Max Flow 170 GPM


AF Series

Submersible Sewage/Wastewater Pumps

  • International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, and highest-grade cast iron construction.
  • P/U/E impellers capable of performing in sewage applications with solids & fibrous materials.
  • Full range of pumps capable of meeting high head and/or high flow duty points & applications.
  • Oil lip seal mounted outside of seal chamber stops solids from gathering around seal faces.
  • Epoxy-coated surfaces to protect the exterior during the life of operation.
  • Integrates airlock valve

General Information

  • Discharge Sizes 2–4″
  • Hp Range 0.5–40
  • Applications Wastewater and Sewage
  • Motor 2–4 Pole
  • Solids Handling Size 1.5–4″
  • Max Head 119 ft
  • Max Flow 580 GPM
  • Optional Float switch

 



AN Series

Submersible Dewatering/Sump Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information

  • Discharge Sizes 2–4″
  • Hp Range 0.5–40
  • Applications Wastewater and Sewage
  • Motor 2–4 Pole
  • Solids Handling Size 1.5–4″
  • Max Head 119 ft
  • Max Flow 580 GPM
  • Optional Float switch


GDS/GDR Series

Submersible Portable Dewatering Pumps

  • Designed for the construction industry
  • Lightweight, portable, and durable
  • Motor frame & mechanical seal bracket are made of aluminum alloy
  • Provides extra water cooling to the motor
  • Features all-new design with exchangeable discharges (vertical & horizontal orientations)
  • Equipped with an auto-cut motor protector
  • Automatic version available with built-in float switch to turn the pump on and off

General Information

  • Discharge Sizes  1–2″
  • Hp Ranges  1/3–1
  • Applications Sumps, Basins & Tanks
  • Motor 2 Pole
  • Max Head 54 ft
  • Max Flow 76 GPM


GF Series

Submersible Grinder Pumps

  • Vortex impeller design prevents clogging
  • Radial cutter/cutter ring are corrosion resistant and hardened to 55-60 Rockwell C
  • Single-phase grinder pump equipped with centrifugal switch & internal capacitor motor design provides 5x higher torque than the average capacitor starting motor
  • Assembled professionally and tested for the highest quality
  • Standard accessories include an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information

  • Discharge Sizes 1.25–2”    
  • Hp Range 1–10
  • Applications Residential Wastewater & Sewage
  • Motor 2 Pole
  • Max Head 178 ft
  • Max Flow 90 GPM

 



F Series

Submersible Effluent Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • Precision manufactured
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information

  • Discharge Sizes 2–3”    
  • Hp Range 0.5–1
  • Applications Sewage/Effluent
  • Motor 2 Pole
  • Solids Handling Size 0.5–1.5”
  • Max Head 50 ft
  • Max Flow 143 GPM

 

 



FN Series

Submersible Wastewater/Effluent Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • IP68 Grade water resistance
  • Precision manufactured
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information

  • Discharge Sizes 2–3”    
  • Hp Range 2–5
  • Applications Wastewater/Effluent
  • Motor 2 Pole
  • Solids Handling Size 1.25–2”
  • Max Head 90 ft
  • Max Flow 345 GPM


Municipal Applications
 
A Series

Submersible Dewatering Pumps

  • All rotors are heat-treated for high-temperature ratings.
  • Stator winding is impregnated with varnish and head-dried in an industrial oven.
  • Assembled professionally and tested for the highest quality.
  • Standard accessories include cable with an epoxy resin-sealed water-resistant cable base, auto-cut thermal motor protector, dual mechanical seals, and lip seal design.
  • The A-05A is an extremely practical and low-temperature pump with an oil-filled motor and single seal design.

General Information

  • Discharge Sizes  2–3″
  • Hp Ranges  0.5–3
  • Applications Sump, Basins & Tanks
  • Motor 2 Pole
  • Solids Handling Size  1/4–1/2″
  • Max Head 119 ft
  • Max Flow 170 GPM


AF Series

Submersible Dewatering Pumps

  • International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, and highest-grade cast iron construction.
  • P/U/E impellers capable of performing in sewage applications with solids & fibrous materials.
  • Full range of pumps capable of meeting high head and/or high flow duty points & applications.
  • Oil lip seal mounted outside of seal chamber stops solids from gathering around seal faces.
  • Epoxy-coated surfaces to protect the exterior during the life of operation.
  • Integrates airlock valve
  • 5Hp and above come standard with seal leak protection, thermal protection, and 50-ft cable

General Information

  1. Discharge Sizes 2–14″  (14>16″ discharge available)
  2. Hp Range 0.5–60
  3. Applications Wastewater and Sewage
  4. Motor 2–6 Pole
  5. Solids Handling Size 1.5–4 3/4″
  6. Max Head 178 ft
  7. Max Flow 6700 GPM
  8. Optional Float switch


AFC Series

Submersible Cutter Pumps

  • Tungsten Carbide-edged impeller is perfect for pumping sewage and breaking/tearing debris
  • International standard design: epoxy resin-sealed cable, motor protector, dry motor, silicon carbide seal, and high-grade cast iron
  • Superior abrasion-resistant silicon carbide mechanical seal to ensure the best seal
  • C-type impeller and cutter casing cover, on the impeller vanes, shred against the inner cutting blades to break down destructible solids
  • Heat-hardened casing cover designed to withstand abrasions

General Information:

  • Discharge Sizes 3”      
  • Hp Range 2–5
  • Applications Wastewater and Sewage
  • Motor 2 Pole
  • Solids Handling Size 2″
  • Max Head 180 ft
  • Max Flow 490 GPM
  • Optional Float switch

 

 



AL Series

Submersible Dewatering Pumps

  • Equipped with thermal motor protector and epoxy cable base treatment
  • Water-resistant and IP68 compliant
  • Entire cast iron construction
  • Compact design, high head, and high efficiency for a wide range of uses
  • Pressure-reducing design
  • 7.5Hp–15Hp triangular handle design for easy handling on guide rail systems

General Information:

  • Discharge Sizes: 2–3”    
  • Hp Range: 2–15
  • Applications: Sumps, Basins, & Tanks
  • Motor: 2 Pole
  • Solids Handling Size 3/4”
  • Max Head 175 ft
  • Max Flow 520 GPM


AN Series

Submersible Dewatering/Sump Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  1. Discharge Sizes 2–4”    
  2. Hp Range 1–5
  3. Applications Sumps, Basins, & Tanks
  4. Motor 2 Pole
  5. Solids Handling Size 1/4–3/4”
  6. Max Head 102 ft
  7. Max Flow 345 GPM


F Series

Submersible Effluent Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • Precision manufactured
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  • Discharge Sizes 2–3”    
  • Hp Range 1/3–1
  • Applications Sewage/Effluent
  • Motor 2 Pole
  • Solids Handling Size 0.5–1.5”
  • Max Head 50 ft
  • Max Flow 143 GPM


FN Series

Submersible Effluent Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • IP68 Grade water resistance
  • Precision manufactured
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  • Discharge Sizes 2–3”    
  • Hp Range 2–5
  • Applications Wastewater/Effluent
  • Motor 2 Pole
  • Solids Handling Size 1.25–2”
  • Max Head 90 ft
  • Max Flow 345 GPM

 



GDS/GDR Series

Submersible Portable Dewatering Pumps

  • Designed for the construction industry
  • Lightweight, portable, and durable
  • Motor frame & mechanical seal bracket are made of aluminum alloy
  • Provides extra water cooling to the motor
  • Features all-new design with exchangeable discharges (vertical & horizontal orientations)
  • Equipped with an auto-cut motor protector
  • Automatic version available with built-in float switch to turn the pump on and off

General Information:

  • Discharge Sizes  1–2″
  • Hp Ranges  1/3–1
  • Applications Sumps, Basins & Tanks
  • Motor 2 Pole
  • Max Head 54 ft
  • Max Flow 76 GPM

 

 



GF Series

Submersible Grinder Pumps

  • Vortex impeller design prevents clogging
  • Radial cutter/cutter ring are corrosion resistant and hardened to 55-60 Rockwell C
  • Single-phase grinder pump equipped with centrifugal switch & internal capacitor motor design provides 5x higher torque than average capacitor starting motor
  • Assembled professionally and tested for the highest quality
  • Standard accessories include an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  • Discharge Sizes 1.25–3”    
  • Hp Range 1–10
  • Applications Residential Wastewater & Sewage
  • Motor 2 Pole
  • Max Head 178 ft
  • Max Flow 90 GPM


HD Series

Submersible Dewatering Pumps

  • Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels
  • IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof
  • Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell

General Information:

  • Hp Range 1.5–20
  • Applications  Flood/water control
  • Motor 2 Pole
  • Max Head 190 ft
  • Max Flow 690 GPM


HDG Series

Submersible Slurry Dewatering Pumps

  • Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels
  • IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof
  • Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell

General Information:

  • Discharge Sizes 3–6”    
  • Hp Range 2–10
  • Applications Dewatering
  • Motor 2 Pole
  • Max Head 125 ft
  • Max Flow 670 GPM

 



IC Series

Submersible Dewatering Pumps

  • Internal casing treated with high solids epoxy coating to improve anti-corrosion and extend product life
  • Dry motor with thermal auto-cut, heat-efficient cast iron motor frame, abrasion-resistant double mechanical seals, and additional oil seal
  • Highly efficient water-cooled motor ensures energy savings even in continuous/intermittent operation
  • Suction impeller design allows for dewatering or circulation applications
  • Pump strainer can be easily replaced with a check valve for dewatering up to 26 feet
  • New casing cover with a metric thread bolt hole to ease valve and adapter connection

General Information:

  • Discharge Sizes 2–6”    
  • Hp Range 1.5–10
  • Applications Dewatering
  • Motor 2 Pole
  • Max Head 135 ft
  • Max Flow 690 GPM


L Series

Submersible Large Volume Pumps

  • Large flow capacities achieved with the use of axial and mix flow designs
  • Impeller flow guide vane for high efficiency
  • Easy handling and low maintenance
  • Heavy-duty housing and cable leads are waterproofed with hardened epoxy
  • Casted ALBC3 material (aluminum bronze) impeller with superior abrasion/corrosion resistance
  • Equipped to handle small solids; epoxy coating prolongs abrasion/corrosion resistance

General Information:

  • Discharge Sizes 4–12”    
  • Hp Range 0.5–20
  • Applications Dewatering
  • Motor 2 Pole (0.5–1Hp) or 4 Pole (2–20Hp)
  • Max Head 32 ft
  • Max Flow 2480 GPM
  •  



LA Series

Submersible Axial Flow Pumps

  • Motor connects directly to the impeller for highest efficiency
  • Shaft and impeller precisely balanced to reduce noise and extend product life
  • Standard protection: thermal protector & mechanical leakage detector; other protection devices available
  • Design of impeller and vanes produces higher pump efficiency
  • Equipped with sacrificial anodes, high active metals used to prevent a less active material surface from corroding; reduces rusting corrosion in seawater and increases the pump’s lifetime

General Information:

  • Discharge Sizes 22 & 28”     
  • Hp Range 50–100
  • Applications Large Volume Dewatering
  • Motor 10 Pole (50–60Hp) or 12 Pole (75–100Hp)
  • Max Head 22 ft
  • Max Flow 18400 GPM

 

  •  



Suction Lift Series

Self-Priming Pumps

  • Capable of priming without flap valve
  • Non-clogging and able to handle large solids
  • Unique lubrication of mechanical seal cavity makes performance more reliable
  • Low rotary speed, reliable operation, easy maintenance, and long product life
  • Equipped with pressure relief valve, solids-handling impeller, abrasion-resistant seal, removable cover plate with easy-grip handle, replaceable wear plate, and removable rotating assembly

General Information:

  • Discharge Sizes 2–10”    
  • Hp Range 1–125
  • Applications Municipal, Residential, Industrial, Paper Mills, Mines, Poultry & Construction Projects
  • Solids Handling Size 3/4–1.25”
  • Max Head 209 ft
  • Max Flow 3400 GPM

 



DBP Series

Diesel Bypass Pumps

  • High Capacity Diaphragm Pump provides automatic and fast priming
  • Oil-Bathed Mechanical Seals allows dry-running capability without damaging the shaft seals
  • Tier 4 Final Engine comes standard with all DBP units and meets the latest engine emission standards
  • Lifting Beam comes standard with all DBP units
  • Different Skid Styles configured to meet your needs
  • High-Efficiency Hydraulic End ensures lower fuel consumption
  • Hinged Pump Housing allows for easy servicing of pump

General Information:
The DBP Series also contains the following features:

  • Discharge 4, 6, 8”
  • Horsepower 30–134
  • Max Capacity 3.22 gal/hr
  • Max Head 90 ft
Industrial Applications
 
A Series

Submersible Dewatering Pumps

  • All rotors are heat-treated for high-temperature ratings.
  • Stator winding is impregnated with varnish and head-dried in an industrial oven.
  • Assembled professionally and tested for the highest quality.
  • Standard accessories include cable with an epoxy resin-sealed water-resistant cable base, auto-cut thermal motor protector, dual mechanical seals, and lip seal design.
  • The A-05A is an extremely practical and low-temperature pump with an oil-filled motor and single seal design.

General Information

  • Discharge Sizes  2–3″
  • Hp Ranges  0.5–3
  • Applications Sump, Basins & Tanks
  • Motor 2 Pole
  • Solids Handling Size  1/4–1/2″
  • Max Head 119 ft
  • Max Flow 170 GPM


AF Series

Submersible Dewatering Pumps

  • International standard design: industrial-grade cable, air-cooled motor, silicon carbide seals, and highest-grade cast iron construction.
  • P/U/E impellers capable of performing in sewage applications with solids & fibrous materials.
  • Full range of pumps capable of meeting high head and/or high flow duty points & applications.
  • Oil lip seal mounted outside of seal chamber stops solids from gathering around seal faces.
  • Epoxy-coated surfaces to protect the exterior during the life of operation.
  • Integrates airlock valve
  • 5Hp and above come standard with seal leak protection, thermal protection, and 50-ft cable

General Information

  1. Discharge Sizes 2–14″  (14>16″ discharge available)
  2. Hp Range 0.5–60
  3. Applications Wastewater and Sewage
  4. Motor 2–6 Pole
  5. Solids Handling Size 1.5–4 3/4″
  6. Max Head 178 ft
  7. Max Flow 6700 GPM
  8. Optional Float switch


AFC Series

Submersible Cutter Pumps

  • Tungsten Carbide-edged impeller is perfect for pumping sewage and breaking/tearing debris
  • International standard design: epoxy resin-sealed cable, motor protector, dry motor, silicon carbide seal, and high-grade cast iron
  • Superior abrasion-resistant silicon carbide mechanical seal to ensure the best seal
  • C-type impeller and cutter casing cover, on the impeller vanes, shred against the inner cutting blades to break down destructible solids
  • Heat-hardened casing cover designed to withstand abrasions

General Information:

  • Discharge Sizes 3”      
  • Hp Range 2–5
  • Applications Wastewater and Sewage
  • Motor 2 Pole
  • Solids Handling Size 2″
  • Max Head 180 ft
  • Max Flow 490 GPM
  • Optional Float switch

 

 



AL Series

Submersible Dewatering Pumps

  • Equipped with thermal motor protector and epoxy cable base treatment
  • Water-resistant and IP68 compliant
  • Entire cast iron construction
  • Compact design, high head, and high efficiency for a wide range of uses
  • Pressure-reducing design
  • 7.5Hp–15Hp triangular handle design for easy handling on guide rail systems

General Information:

  • Discharge Sizes: 2–3”    
  • Hp Range: 2–15
  • Applications: Sumps, Basins, & Tanks
  • Motor: 2 Pole
  • Solids Handling Size 3/4”
  • Max Head 175 ft
  • Max Flow 520 GPM


AN Series

Submersible Dewatering/Sump Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  1. Discharge Sizes 2–4”    
  2. Hp Range 1–5
  3. Applications Sumps, Basins, & Tanks
  4. Motor 2 Pole
  5. Solids Handling Size 1/4–3/4”
  6. Max Head 102 ft
  7. Max Flow 345 GPM


F Series

Submersible Effluent Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • Precision manufactured
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  • Discharge Sizes 2–3”    
  • Hp Range 1/3–1
  • Applications Sewage/Effluent
  • Motor 2 Pole
  • Solids Handling Size 0.5–1.5”
  • Max Head 50 ft
  • Max Flow 143 GPM


FN Series

Submersible Effluent Pumps

  • Rotors heat-treated for high-temperature ratings
  • Stator winding impregnated with varnish and then heat-dried in an industrial oven
  • IP68 Grade water resistance
  • Precision manufactured
  • Assembled professionally and tested for the highest quality
  • Standard accessories include cable with an epoxy resin-sealed & water-resistant cable base, auto-cut thermal motor protector, and lip seal design

General Information:

  • Discharge Sizes 2–3”    
  • Hp Range 2–5
  • Applications Wastewater/Effluent
  • Motor 2 Pole
  • Solids Handling Size 1.25–2”
  • Max Head 90 ft
  • Max Flow 345 GPM

 



GDS/GDR Series

Submersible Portable Dewatering Pumps

  • Designed for the construction industry
  • Lightweight, portable, and durable
  • Motor frame & mechanical seal bracket are made of aluminum alloy
  • Provides extra water cooling to the motor
  • Features all-new design with exchangeable discharges (vertical & horizontal orientations)
  • Equipped with an auto-cut motor protector
  • Automatic version available with built-in float switch to turn the pump on and off

General Information:

  • Discharge Sizes  1–2″
  • Hp Ranges  1/3–1
  • Applications Sumps, Basins & Tanks
  • Motor 2 Pole
  • Max Head 54 ft
  • Max Flow 76 GPM

 

 



HD Series

Submersible Dewatering Pumps

  • Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels
  • IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof
  • Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell

General Information:

  • Hp Range 1.5–20
  • Applications  Flood/water control
  • Motor 2 Pole
  • Max Head 190 ft
  • Max Flow 690 GPM


HDG Series

Submersible Slurry Dewatering Pumps

  • Designed for civil engineering applications: its portability, double outer casing, and water-cooling motor make it possible to run the pump in low water levels
  • IP68 standard epoxy resin cable, automatic rest motor protector, and silicon carbide double mechanical seal make it durable and leakproof
  • Multi-impeller design with high chrome alloy steel (HiCrFC) impeller, wear plate/wear rings with hardness 55–60 Rockwell

General Information:

  • Discharge Sizes 3–6”    
  • Hp Range 2–10
  • Applications Dewatering
  • Motor 2 Pole
  • Max Head 125 ft
  • Max Flow 670 GPM

 



IC Series

Submersible Dewatering Pumps

  • Internal casing treated with high solids epoxy coating to improve anti-corrosion and extend product life
  • Dry motor with thermal auto-cut, heat-efficient cast iron motor frame, abrasion-resistant double mechanical seals, and additional oil seal
  • Highly efficient water-cooled motor ensures energy savings even in continuous/intermittent operation
  • Suction impeller design allows for dewatering or circulation applications
  • Pump strainer can be easily replaced with a check valve for dewatering up to 26 feet
  • New casing cover with a metric thread bolt hole to ease valve and adapter connection

General Information:

  • Discharge Sizes 2–6”    
  • Hp Range 1.5–10
  • Applications Dewatering
  • Motor 2 Pole
  • Max Head 135 ft
  • Max Flow 690 GPM


L Series

Submersible Large Volume Pumps

  • Large flow capacities achieved with the use of axial and mix flow designs
  • Impeller flow guide vane for high efficiency
  • Easy handling and low maintenance
  • Heavy-duty housing and cable leads are waterproofed with hardened epoxy
  • Casted ALBC3 material (aluminum bronze) impeller with superior abrasion/corrosion resistance
  • Equipped to handle small solids; epoxy coating prolongs abrasion/corrosion resistance

General Information:

  • Discharge Sizes 4–12”    
  • Hp Range 0.5–20
  • Applications Dewatering
  • Motor 2 Pole (0.5–1Hp) or 4 Pole (2–20Hp)
  • Max Head 32 ft
  • Max Flow 2480 GPM
  •  



LA Series

Submersible Axial Flow Pumps

  • Motor connects directly to the impeller for highest efficiency
  • Shaft and impeller precisely balanced to reduce noise and extend product life
  • Standard protection: thermal protector & mechanical leakage detector; other protection devices available
  • Design of impeller and vanes produces higher pump efficiency
  • Equipped with sacrificial anodes, high active metals used to prevent a less active material surface from corroding; reduces rusting corrosion in seawater and increases the pump’s lifetime

General Information:

  • Discharge Sizes 22 & 28”     
  • Hp Range 50–100
  • Applications Large Volume Dewatering
  • Motor 10 Pole (50–60Hp) or 12 Pole (75–100Hp)
  • Max Head 22 ft
  • Max Flow 18400 GPM

 

  •  



Suction Lift Series

Self-Priming Pumps

  • Capable of priming without flap valve
  • Non-clogging and able to handle large solids
  • Unique lubrication of mechanical seal cavity makes performance more reliable
  • Low rotary speed, reliable operation, easy maintenance, and long product life
  • Equipped with pressure relief valve, solids-handling impeller, abrasion-resistant seal, removable cover plate with easy-grip handle, replaceable wear plate, and removable rotating assembly

General Information:

  • Discharge Sizes 2–10”    
  • Hp Range 1–125
  • Applications Municipal, Residential, Industrial, Paper Mills, Mines, Poultry & Construction Projects
  • Solids Handling Size 3/4–1.25”
  • Max Head 209 ft
  • Max Flow 3400 GPM

 


 
DBP Series

Diesel Bypass Pumps

  • High Capacity Diaphragm Pump provides automatic and fast priming
  • Oil-Bathed Mechanical Seals allows dry-running capability without damaging the shaft seals
  • Tier 4 Final Engine comes standard with all DBP units and meets the latest engine emission standards
  • Lifting Beam comes standard with all DBP units
  • Different Skid Styles configured to meet your needs
  • High-Efficiency Hydraulic End ensures lower fuel consumption
  • Hinged Pump Housing allows for easy servicing of pump

General Information:
The DBP Series also contains the following features:

  • Discharge 4, 6, 8”
  • Horsepower 30–134
  • Max Capacity 3.22 gal/hr
  • Max Head 90 ft