Accessories

 

Quick Reference

We have one of the most complete line of accessories on the market. Also check out our products page.

 

Basins

Basins contain a minimum of 40% fiberglass and a maximum of 60% commercial-grade resin.  This glass-to-resin ratio and filament winding manufacturing process allow us to provide our customers with the most structurally-sound basin available. Also, the basins are environmentally friendly.  Furthermore, our basins are produced to withstand soil loadings in excess of twice the force created by saturated sand or 120 pounds/ft³.

Control Panels

HCP features one of the most complete line of System Alarms, Float Switches, Accessories & Control Panels. Let us help you with all of your septic and wastewater needs, including:

  • Plug-In Pedestal/Post Alarms                                      
  • Indoor/Outdoor High Water Alarms with Battery Back-Up
  • Plug-In /Standard Junction Boxes
  • Custom Junction/Connection Boxes
  • Mechanical Control Duty Switches
  • Mercury Control Duty Switches
  • Standard and Heavy Duty Switches
  • Narrow and Wide Angle Float Switches
  • Pump Up and Pump Down Float Switches
  • Aerobic Control Panels
  • Time Dosing Control Panels
  • Grinder Control Panels
  • Simplex and Duplex Panels with NEMA 4X Enclosures
  • Grasslin and Omron Timers
  • UL and CSA Listed Products
  • Full Line of Accessories and Parts

Guide Rail Systems

GRS is an auto coupling system for pump submersion installation.  The GRS will provide an easier and safer way to maintain and repair the pump.  All guide rail systems include a GRS Elbow, GRS bracket, packing/bolts, GRS adapter and stainless steel chain.

Iron Discharge 2–16″
Stainless Steel Discharger  2–3″
Applications Sewage tanks, septic tanks, factories, homes, and public buildings

Floats

2900 Series Mercury Floats

Designed for accurate liquid level control in many applications including sewage environments.  The float switch can be utilized to signify specific water levels or for direct alarm actuation. Float is leak proof, shock proof, and impact resistant. 

  • Minimum operating temperature 320
  • Maximum operating temperature 170o℉
  • Electrical Rating 10 AMP – 120 VAC • 3 AMP – 240 VAC
  • Actuation Point 1″ Above/Below Horizontal
  • Cord Weight Zinc Plated Cast Iron
  • Switch Variations Normally open / Normally closed / Single Pole, Double Throw
  • Cord Lengths 20 or 40 ft

2900 Series Mechanical Floats

Designed for accurate liquid level control in many applications including sewage environments.  The float switch can be utilized to signify specific water levels or for direct alarm actuation. Additionally, float switch can be utilized to signify specific water levels or for direct alarm actuation. Float is leak proof, shock proof, and impact resistant. 

  • Adjustable pumping range of 6 to 36 inches.
  • 16-gauge, 2-conductor, SJOW water-resistant (CPE) material
  • Electrical Rating: 13 AMP – 120 VAC for 1/2Hp & 1Hp at 240 VAC • 15 AMP – 120 VAC for 1Hp & 2Hp at 240 VAC
  • Available in 20 or 40 foot lengths with piggyback plug.

2900 Series Mechanical Piggy Back Floats

Designed for accurate liquid level control in many applications including sewage environments.  The float switch can be utilized to signify specific water levels or for direct alarm actuation. Additionally, float switch can be utilized to signify specific water levels or for direct alarm actuation. Float is leak proof, shock proof, and impact resistant. 

  • Adjustable pumping range of 6 to 36 inches.
  • 16-gauge, 2-conductor, SJOW water-resistant (CPE) material
  • Electrical Rating: 13 AMP – 120 VAC for 1/2Hp & 1Hp at 240 VAC • 15 AMP – 120 VAC for 1Hp & 2Hp at 240 VAC
  • Available in 20 or 40 foot lengths with piggyback plug.

Outlets & Outlet Sets

  • For use with the AS, AG and IC Pump Series.
  • Cast iron construction.
  • Connection fittings for 2–6″ discharge.
  • Threads Available: PT, PF, NPT.
  • Suitable for applications in cramped and confined spaces.

Flanges & Flange Sets

  • Cast iron construction.
  • Flange fittings for 1.25–8″ discharge.
  • Threads Available:  PT, PF, NPT

Adapters

Adapter Design

  • Flange conforms to JIS 10K/ANSI 125/DIN 2633.
  • 2–4″ and 6″ Flange Connection
  • Cast Iron construction.
  • Thread types: Taper, Parallel

Valves

PVC Ball Valve

  • High quality corrosion resistance
  • Pressures up to 300 PSI.
  • Bubble tight shut off.
  • True union design allows easy installation into existing piping.
  • Full rated pack pressure.
  • PVC SCH 80

PVC Swing Check Valve

  • Full-flow, low pressure drop, and great sealing ability.
  • The flapper can withstand the instant back pressure surge up to two times the PN.
  • Can be used either vertical or horizontal.
  • No internal metal parts are exposed, no spring, and complete anti-corrosion.
  • PVC SCH 80

Mechanical Seals

Mechanical Seals/Oil Seals

  • Mechanical seals are engineered for every HCP pump models to offer long lasting usage and prevent leakage for the Submersible pump in Sewage, wastewater, and dewatering applications.
  • Single/Double mechanical seals have a single spring coiled design for more flexibility to accommodate any misalignment, shaft deflection, and break away shock loading.  This can prevent a leakage issue.
  • For fresh water conditions, Carbon Ceramic may be used, as it is the most cost effective.
  • Silicon Carbide seal is effective for a wide range of pumping applications, and has a great wear resistance, strength and temperature resistance.
  • An additional oil seal between the impeller and shaft provides initial waterproofing and sand protection from reaching the mechanical seal for extending longer operation during the pump’s life.

Supplements

Auto-Cut Protector

The auto-cut protector is an automatic cut-off switch installed inside the motor. The switch will automatically cut off power to the motor if there is a power surge or if overheating occurs. The switch will automatically restart the motor once the temperature drops to about 60–70℃.

Overheat Protector

The overheat protector is an automatic cut-off switch built into the single-phase motor designed to monitor the temperature of the inner motor. The switch automatically cuts off power if the motor temperature exceeds the maximum allowable operating temperature. The switch will automatically restart once the motor temperature drops to about 60–70℃.

Miniature Thermal Protector

The MT sensor is embedded in every phase of motor winding, and transmits a signal to the control panel.  Control can be setup to cut off power when the MT is activated, and restart when the MT is deactivated.

Moisture Protector

The MS is used to detect moisture leakage through the mechanical seals.  This occurs when the seal has been worn down or damaged.  If moisture is found, the sensor will then trigger and transmit a signal to the control panel.  The control panel will then set off a warning signal and/or power off to protect the pump motor.

Other Accessories

3-Hook U-Type Stainless Steel Bracket

4-Hook Stainless Steel Float & Mounting Bracket

Stainless Steel Pipe Mount Clamp